Tp-Access link’s Point is a dual-band network device with the newest 802.11ac technology. It provides enhanced wireless performance across your home. Furthermore, the access point is equipped with 32 MU-MIMO technology, allowing you to connect to the wireless network simultaneously. This gadget has a higher signal rate than a regular device. The 5GHz network, as well as the 2.4GHz network, provide a total Wi-Fi range of 1300Mbps and 450Mbps, respectively. The access point apparatus’s TP-Link Auranet Controller software allows for many EAPs to be controlled and managed. The setup wizard may be redirected to, and the access point can be completely configured. Then, in a long-range area, you approach the wireless signals totally.

The Tp-link Wi-Fi access point gives you the fastest Wi-Fi in your house. Multiple home networks can safely connect to the Wi-Fi network using this gadget. However, you must configure the setting to ensure its speed. The login page will allow you to easily configure your settings.

  1. You must assure the Wi-Fi range on a PC or mobile device in order to log in to the access point account.
  2. Select or choose any available web interface on your Wi-Fi network-connected device.
  3. The login window can be accessed via the https / login wizard.
  4. Because the normal login admin panel does not provide access to the login window, you must use the tp-link access point IP address.
  5. You must type the default password in the login window to gain access to the account.
  6. Select the Login option from the drop-down menu. has changed the access point’s password

  1. You can change the tp-link Wi-Fi access point’s password using the http / change password wizard.
  2. After the account has been logged off, connect to the access point using the default login IP or web address.
  3. Then, in their password field, type the default password for the tp-link access point.
  4. Once you’ve logged in to your access point account, go to the menu page and select management.
  5. Select the access control option from the available options under administration.
  6. Then, on the access point’s left page, click the password button.
  7. Write an old password, a new password, and a new password for confirmation to effectively change the login default password.
  8. To save this new password, select the Save/Apply option.

As a result, the Wi-Fi access point’s default login password was successfully updated. You will now use a new password to log into the account.

  1. Firstly, Use the default login IP address to connect to the tp-link access point. is the default login IP address.
  2. Simply type this default IP address into your favorite browser, and the access point login wizard will be redirected.
  3. Write admin in the password field and mention the admin details in the username area.
  4. Select the Maintenance option to navigate the Administration settings.
  5. Choose the SSID option to alter the SSID of your tp-link access point.
  6. In the username field, type the new username; the username must not be more than 15 characters.
  7. To store the SSID setting, click the save button.

If the usual problem is caused by a wireless Wi-Fi access point, you can easily fix it. The troubleshooting procedures for resolving the common access point issue may be found here.

The access point’s front surface has a built-in smart indication light. The indicator light blinks continually on occasion. Then you must check that the tp-link access point firmware is up to date in order to resolve this issue.

  1. Firstly, Go to http / and use the password to log in to the account using the login wizard.
  2. Then, select Advanced Settings and System Tools from the drop-down menu.
  3. From the system tools menu, select the firmware upgrade option.
  4. Select the firmware file from the browse menu.
  5. From the drop-down menu, select the upgrade option. The firmware update procedure begins.

Restart the wireless access point.

When the login web URL does not work, the device must be rebooted.

  1. If the modem is attached to the access point, disconnect the connection.
  2. Disconnect the access point from the outlet.
  3. Next, look for the power button and push it for a few seconds.
  4. As a result, The problem with tplinkap not working should now be resolved.

To go to the login page, use the default login IP:

If the tp-link access point’s login page is unavailable, you won’t be able to configure the network.

  1. Firstly, Make certain that is properly and accurately referenced in the web interface.
  2. Then, Check the browser interface version and, if it’s out of date, update it.
  3. To access the default login wizard, type in the login IP address.

Can’t approach the Wi-Fi range of your host network if you don’t have an internet connection. You can conduct a factory reset if you want to fix the problem. You may easily factory reset the access point using the web interface.

  1. Check for power; if the power LED light is off, press the power button to turn it on.
  2. Then, Go to the advanced settings from the admin page.
  3. You must select the factory reset option from the system tool.
  4. Select the factory reset option and confirm the pop-up message by pressing the OK button.
  5. After that, the access point device will be entirely reset and the issue will be resolved.

Ascertain that the cable connection is in good working order:

If the access point’s power does not turn on. Double-check the cable connection.

  1. Firstly, Double-check that the power cord is fully inserted into the power connector.
  2. Also, make sure the AC power adapter is securely inserted into the wall outlet.
  3. Check the turn-on position of the access point’s power button.

The tp-link access point review, in my opinion, is excellent and far superior to the other gadget evaluation. With this network, many host networks can easily and quickly reach the wireless network. The wireless coverage is excellent and flawless. However, The access point’s Wi-Fi range positively covers a long-range area. Inside the access point is a strong signal amplifier that greatly improves the internet connection. The Ethernet port is located here, and it allows a wired device to connect to the network.

In addition, the tp-link wireless Wi-Fi access point is compatible with cable modems, PCs, laptops, mobile phones, and other devices. The login admin panel enables you to quickly configure the network. Perform the setup with ease using this panel.

You can upgrade your access point to the current version via wifi. Additionally, simply reset the access point to its factory defaults. As a result, the wireless access point is a more dependable and fast network device.


Please enter your comment!
Please enter your name here