wifi.wavlink.com admin

wifi.wavlink.com is a website dedicated solely to Wavlink mesh wifi setup. The internal server http://wifi.wavlink.com allows you to access the Wavlink range extender‘s admin interface. It also gives you the ability to easily configure and control the Wavlink range extender. Let’s look at the process in more detail in the next post. So you can easily access the extender’s login and settings.

Check out the methods below for using the web browser to interact with wifi.wavlink.com or ap.setup. These URLs will only function if you are connecting just Wavlink devices. Such as extenders or routers.

  • It’s preferable to start by plugging the Wavlink range extender into the primary power socket. After connecting, turn on the main power switch.
  • After that, wait a few moments for the extender’s power LED to turn on.
  • As a result, go to the wifi settings of your chosen wifi-enabled device. Such as a smartphone or a computer.
  • Next, type in the default wireless password for the Wavlink network name (SSID) to which you want to connect.
  • Go to your internet browser and type wifi.wavlink.com into the search bar to continue the configuration process.
  • Next, select your desired language for configuring the online user interface. And then input the default admin and password on the tab.
  • As a result, click the login button.
  • After that, select or choose the country in your region from which you want to operate the Wavlink extension.
  • When you’re through adjusting the Wavlink repeater’s settings. Click the Next button.
  • As a result, adjust the wifi settings on the repeater. Including the wireless network name, network pass, and other security levels for the repeated network connection.
  • Finally, finish all of the configuration procedures to complete the Wavlink extender setup.
  • Now you can go back to your PC’s settings. Double-check the wifi network name that has been provided to you.
  • Also, connect the Wavlink extender‘s extended network by entering the relevant wifi password in the boxes.
  • As a result, press the connect button to join the network.
  • By going to wifi.wavlink.com and modifying the settings during the configuration process. You can set up the Wavlink range extender.
  • Let’s start at the beginning, where the first step is to set up the TCP protocol. Which will assist you in automatically obtaining the IP address of your wireless client devices.
  • To connect to a wired or wireless connection, connect wifi-enabled devices. Such as computers, laptops, or mobile devices.
  • If you go for a wired connection. You’ll need an Ethernet cable to keep the connection from lagging or being disrupted from the outside.
  • So, go ahead and open an internet browser on a computer or any other wifi-enabled device you’ll be using.
  • After that, type wifi.wavlink.com into the search box of your computer or laptop. You can also use the search field to enter the Wavlink repeater’s LAN IP address.
  • However, you can utilize the Wavlink range extender’s default IP address of or wifi.wavlink.com. As a result, press the enter key.
  • Finally, you’ve arrived at the Wavlink extender’s login page and selected the language. You want to use the Wavlink range extender settings.
  • On the wifi.wavlink.com login page, type “admin” in the wifi.wavlink.com admin username area. Then enter the asked passkey that you were given during the setup procedure.
  • Though you’ve changed your password, type it in even if you’re still using “admin” in the username tab.
  • As a result, click the login button to be taken to the wifi.wavlink.com online user interface.

As you may be aware, wifi.wavlink.com is a website. That assists with the setup of the Wavlink wifi router or extension. Simply type wifi.wavlivk.com into the search field. And it will take you to the login page. Where you will input the admin name and password to access the Wavlink router’s settings. Simply follow these steps to connect your wifi-enabled devices to the repeater.

  • Start by plugging the gadget into the wall jack, which is the simplest option.
  • Then, after waiting more than thirty seconds, use any Wi-Fi-enabled device to locate and connect to the wireless signal.
  • After connecting the smart device to the Wavlink repeater. Open an internet browser and type into the address bar to configure the repeater with the router.
  • As a result, a login screen will show in your window or on your mobile device.
  • You can use any computer or mobile device, however, there are some minor differences.
  • If the computer’s default IP does not match the router’s IP. The PC will be unable to connect to the extender.
  • In that situation, you must modify your computer device’s IP address automatically to obtain an IP address. After which the connection will be fine.

These methods will undoubtedly connect you to the Wavlink repeater’s web address. If these methods do not resolve the issue and wifi.wavlivk.com remains unavailable, proceed to the next step.

  • A poor physical connection could be caused by an inappropriate physical connection. Between the host router and the wireless extender, is occasionally the cause. To fix this problem, make sure that the LAN LED indicator is lit up. Also, make certain that the connection between the computer and the extension is stable. The user is unable to connect to the wifi.wavlink.com web interface if the internet connection has any flaws or faults. You will be unable to interact with the Wavlink web management page. Due to a bug in the web user interface.
  • If you use a PC to connect to wifi.wavlivk.com. It must have the IP address of the wireless extender. In order for your PC to access its web interface due to the incorrect IP address. Most extenders use the DHCP function to automatically assign an IP address to the PC. Which is what happens most of the time. If your model extender has a DHCP server. You’ll need to manually assign an IP address to have access to the Wavlink extender’s web control page.
  • It can also happen if you’re using a restricted browser. If you’re going to visit wifi.wavlink.com through an internet browser, make sure it’s an allowed browser. It is recommended that you use Google Chrome, Internet Explorer. Firefox, or Mozilla to use the Wavlink extender’s web administration interface. If you’re having trouble with any other browser. Switch to one of them right away.

These are the issues and their precise remedies. You won’t be able to confront that difficulty again after using these remedies. 


Please enter your comment!
Please enter your name here