Important Tips for Geyser Maintenance & Installation

One of the cruelest things that can happen to you, is your geyser malfunction in the middle of a relaxing hot bath during winter.

Like any other electrical or electronic device, your geyser also requires proper maintenance for long-lasting, hassle-free is Important Tips for Geyser Maintenance & Installation

It does not matter how recently you bought your new geyser; You should do the proper exercise right from the moment you start installing your hot shower companion.

When you can’t completely stop the wear and tear on your geyser machinery, you can certainly extend your life by following easy-to-use tips for efficient water heating for years and years Huh.

This article also has geyser installation and maintenance tips to help you get all your information under one roof.

Geyser Installation Tips

Leave enough space between the geyser and the surrounding walls.
When installing geysers in your bathroom, you should make sure that you leave enough space between the appliance and the walls.

This comes to your rescue when you need to repair the affected parts, allowing the technician to easily maneuver your equipment into the available space to properly check and correct problems.

Easy access

Wherever you place the geyser, it should be easily accessible for any repair or service needs. Also, keep it away from sources of moisture like toilets, bathtubs or shower.

Install geysers at an optimal height

Install your best geyser at a minimum height of 6 feet from the bathroom floor.

As suggested by experts, the water pressure at this altitude generates a flow of appropriate hot water from the geyser for the heavenly hot bath.

Connect your geyser to MCB

This may sound technical, but you only have to ask your technician to configure your geyser’s electrical connection to a miniature circuit breaker (MCB).

MCB will save your geyser by cutting power in case of unwanted power fluctuations. It will also provide effective protection against short circuits.

In addition, use high-quality electrical switches and flameless switchboards that ensure a high level of safety.

Why is disinfection necessary for medical facilities?

Tips for regular geyser maintenance

Once you have successfully installed your geyser, you should channel your efforts for your regular maintenance by following the suggestions below.

Turn off the geyser when not in use

While this may sound like a simple matter, it is very useful in ensuring the best performance of your geyser without frequent repairs.

Advanced geyser models come with strong safety mechanisms that encourage you to be careless and stay on your geyser for extended periods.

Their intention to get hot water for everyone and to save them from spending hot water, again and again, is understandable. However, keeping the geyser for a long time puts pressure on the device and reduces the life of its parts.

The new variants heat the water quickly in 5 minutes and there is no need to turn it on for a long time. Therefore, turn off the geyser when it is not used to ensure long-lasting serviceability.

Maintain low-temperature settings

You should maintain a low-temperature setting on your geyser. By considering such settings, the geyser will heat water to the desired temperature in a short time and also use fewer resources.

Therefore, you can save electricity and extend the life of the geyser through reduced water heating functions.

Hot water flows from the geyser as a result of the low-temperature setting. It is ideal for young children by preventing accidental burns with very hot water.

Replace anode rod every few years

The large geysers include an anode rod inside the tank that acts as an anti-corrosion agent. Prevents corrosion or oxidation of the tank by attracting rust and impurities present in the water.

The anode rod melts within a few years or becomes coated with white calcium sediment on its surface due to hard water. Therefore, you should replace this rod every 3 years to ensure proper geyser operation.

Replace plastic tubes with metal tubes

If you have a plastic inlet and outlet pipes in your geyser, replace them with metal ones. This will not only provide efficient heat protection but also ensure the long service life of the pipes.

Never miss annual maintenance

You should regularly do annual maintenance on your geyser. Always hire the services of a reputable and reliable geese repair and maintenance company.


Please enter your comment!
Please enter your name here