tenda nova mesh wifi setup
tenda nova mesh wifi setup

Setup Tenda Nova Mesh WiFi system is the solution. In contrast to conventional Wi-Fi, Tenda Wi-Fi offers massive coverage. If you combine the three Tenda MW6 devices. It can cover more than 6,000 square feet. It is also ideal for a big house where almost everyone needs the Internet constantly. Wireless internet access can cover just a small section of your home. But Tenda MW6 can cover the whole house. Tenda Nova says ‘NO’ to the Internet and to low-wireless internet access.

Tenda Nova Mesh Wifi Installation

1. Wi-Fi App

  • Firstly, The Tenda Wi-Fi application needs to be installed on your mobile phone. It can be used for both iOS and Android.
  • Just go to the app store or play store and install the Wi-Fi application in Tenda.
  • The QR code that you printed can also be scanned in the Tenda Wi-Fi app installation guide.

2. Tenda Router

You will see that some ports exist when flipping over your Tenda Nova device. The WAN port, the power line to the POW port must be connected via your broadband line. Just switch on your device once you’ve finished. The wireless signal of your mobile phone can now be connected to Nova, the installation process can continue.

Nova Mesh Wifi Setup

  1. Open the WiFi Shop app and then click the “Setup” button.
  2. Software recognition of the Nova signal. You need to fill in the information you need. Once all the information has been entered, just click ‘Next. Now connected to the Internet on the next screen. Click ‘Next.’
  3. The Wi-Fi and password can change to fit your desired items. Simply enter your name and then your password in settings. Click ‘OK’ when you’re done.
  4. As a result, The light indicator for Tenda Nova would blue, showing that your device now has internet connections.
  5. The installation of the other two is easy once you have set up your first Nova device. Just take your Nova device and then put it where you want it. Connect it for one minute to a stable power connection. The router is configured automatically. Maintain an eye on the light indicator. You’re set if it’s blue. Only set the position of the Tenda Nova device if the light indicator shows a different color until the LED turns blue.
  6. 6. Make the last device the same thing. Once all of your devices have configure, your Tenda Wi-Fi application shows that every device is online.

FAQs

How can I connect Amazon Alexa to Tenda Wi-Fi?

1. Firstly, Download and set up Amazon Echo for the Amazon Alexa app.
2. Be sure to connect manually when you configure your Amazon Echo if it doesn’t connect automatically.Echo device plug-in.
3. A few minutes wait. Wait. It is an indication that your device is ready if you see an orange ring. Click on the “Continue” button. Select MW6 and input a Wi-Fi network.
4. Press Connect.

How to configure the AP mode for Tenda MW6 Mesh WLAN?

1. Open your phone with the ‘Wi-Fi Shop’ app.
2. Moreover, Connect the MW6 ethernet backhaul cable to the WAN port with the AP Management Router.

What should you do when your first connection type is not identified on your nova device?

1. Firstly, Turn on and off your Tenda Nova device and your modem.
2. Connect your Tenda device via an ethernet cable to your modem.
3. Wait on your shop to turn blue for the light indicator.
4. Connect the Nova Wi-Fi signal to your telephone

How do you do when your modem and Tenda device are turned off and when you activate it, the network is not recognized by both?

1. Firstly, Try to connect a cable modem to your wireless network. Turn your modem off now and turn it on. Wait until the network is recognized by your router.
2. Connect your Nova wireless router’s WAN port to the LAN port. And use the Tenda Wi-Fi app to access the internet on your Nova device.
3. You may need your Tenda software to upgrade as well. Open the Tenda Wi-Fi app’s ‘setup’ and check firmware status. The most recent firmware must be upgraded to tenda nova mw6 setup.
4. on the other hand Connect your Tenda device to the modem and restart it once you have installed the latest firmware. Your connection will soon be recognized by the Nova device.

What should I do if one node does not connect with the remainder?

1. It happens when the nodes are too far away. Try to change the position to ensure that the node approaches the other nodes.
2. Make sure you reboot it and check the connection when the third node is not connected. Verify whether the node can connect to the APP and verify the light indicator.
3. It’s time to reset tenda nova mw6 setup if none of the above work. Hold down the reset button for 20 seconds and wait until the light turns white. Remove the reset button once it turns white.
4. Moreover, Open your phone Tenda Wi-Fi app if the light starts blinking. You should receive a notification that you want to join a new Nova device. Click the ‘Allow’ button.

LEAVE A REPLY

Please enter your comment!
Please enter your name here