TP-Link TL-WA860RE Range Extender | tplinkrepeater.net

TP-Link TL-WA860RE Range Extender is small in size and can mount on wall. TL-WA860 has two antennas which helps in steady and fast network and also boost the network to dead zones of home/office. Also have very effortless set up process with web domain, WPS and Tether App. This extender is easy to relocate to different place. Here you can use the Tether app to monitor all devices.

TP-Link TL-WA860RE Setup Range Extender with Web Domain

1. Firstly need to unbox tp-link tl-wa860re manual.
2. Now attach the antennas with extender and set the extender in the right direction.
3. Confirm the internet signals, in case the signals are not steady then try to stable it.
4. After that unplug the modem and attach the power adapter with extender is at working condition.
5. Further connect modem, PC and extender with the Ethernet port.
6. Now from your connected device and open any web browser, in the address bar type www.tplinkrepeater.net or 192.168.0.254 and click enter.

TP-Link TL-WA860RE Setup Range Extender with WPS

1. Firstly unbox the TP-Link RE580D extender.
2. Now attach the antennas with extender and place it close to router.
3. Here check your internet signals, in case you find it not steady then fix it.
4. After that plug in your extender to power socket near to router.
5. Now press and hold the WPS button on the extender and in the same time within two minutes press and hold on router also.

TP-Link TL-WA860RE Range extender setup via Tether App

1. Firstly you need to unbox TL-WA860RE extender.
2. Then place at right place and close to router.
3. Now check your signal, if any issue fix it.
4. Make sure to plug in your extender and check the LED on extender is on.
5. Then from your connected device open any play store and search Tether app and download it.

TP-Link TL-WA860RE Setup Firmware update

1. Firstly from your device launch any web browser and in the address bar enter www.tplinkrepeater.net or 192.168.0.254.
2. Now the log in page will display, here enter the username and password as admin.
3. Then click to advanced settings> firmware update.
4. Lastly you can now utilize the updated firmware update.

TP-Link TL-WA860RE Range Extender firmware update via Tether App

1. First open play store from your device.
2. Then search for Tether app and download it.
3. Now open the app and fill all the information of the extender and click on settings.
4. Click on Firmware update.
5. Finally you can use the latest firmware with security cover.

TP-Link TL-WA860RE Range Extender Soft Reset

1. Launch any web browser from your device.
2. Now in the address bar enter www.tplinkrepeater.net or 192.168.0.254.
3. Then you will see the TP-Link login page, enter the credentials as admin and click to log in.
4. Here click on advanced settings and further click on factory reset.
5. Further your extender is in the default settings.
6. So here again set up your extender.

TP-Link TL-WA860RE Range Extender Hard Reset

1. Firstly on the extender search the reset button.
2. Now grab the paper clip or pin and press the reset button.
3. Then you see the LED starts blinking then release the reset button.
4. Once you will find the lights get steady.
5. Then your TP-Link extender is in default setting.
6. So now again set up the extender.